Workshop Tools in Pune- Noble Hardware
Designed for the pressure testing of cooling systems and radiator caps up to 35psi (2.5bar). Suitable for used on most makes of car and commercial vehicles, including: Mercedes, Ford, Chrysler, Peugeot, Honda, Lexus, Mazda, Suzuki, Toyota, Nissan, Opel, Volkswagen, Saab, Volvo, Audi, Citroen, Fiat and BMW.
Contents: 14 radiator pressure testing caps, for use in testing cooling systems for leaks. Two cap adaptors, sizes 2-3 and 4-5, for testing radiator cap release pressure and seal condition. Two 200psi coolant hoses (5/16" and 3/8"), for use with T-adaptor for in-line pressure testing. T-adaptor for creating in-line pressure testing set-up. Two 3/4" hose clips.
M2 - M16: HSS Ground Thread. Taper and Second Taps: M2 x 0.40, M3 x 0.50, M4 x 0.70, M5 x 0.80, M6 x 1.00, M8 x 1.25, M10 x 1.50 and M12 x 1.75. Manufactured to ISO 529. Bar Type Tap Wrenches: 1/16" - 1/4" and 3/16" - 1/2". Tapping Drills to Suit: 1.6, 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 and 10.2mm. Made to BS 328/DIN 338N. 13/16" O/D Split Dies: M2 x 0.40, M3 x 0.50, M4 x 0.70, M5 x 0.80 and M6 x 1.00. 1" O/D Split Dies: M8 x 1.25 and M10 x 1.50. Manufactured to BS 1127. Diestocks: 13/16" O/D and 1" O/D. HSS Die Nuts: M12 x 1.75 and M16 x 2.00. Manufactured to BS 1127.
2 and 3 tone capacity.
Jumper cables are used to start a vehicle with a dead battery. The jumper cables are attached to the dead battery and a fully charged battery in another vehicle. Once the vehicle with the dead battery is started, drive the vehicle to charge the dead battery. Cold weather resistant. Great for truck and cars. Works with both top and side post terminals. Insulated Clamps.